2.2 KiB
2.2 KiB
ESP32-S3 Heating Controller Upload Instructions
🎉 Compilation Successful!
Your heating controller firmware has been successfully compiled with all features:
✅ Features Implemented:
-
Multi-Page Display System (4 pages):
- Page 1: Main Status (current temp, target, heater status)
- Page 2: Temperature Details (all temperature settings)
- Page 3: Energy Statistics (kWh, costs, cycles)
- Page 4: System Information (uptime, memory, WiFi)
-
Touch Controls:
- Tap right side of screen to change pages
- Interactive buttons for temperature control
- Auto page switching every 15 seconds (can be disabled)
-
Remote API Integration:
- Fetches data from your heating system API
- Displays real-time temperature, status, energy usage
- Control Commands (tap to activate):
- Day/Night mode switching
- Boost mode activation
- Temperature adjustment (+/- 0.5°C)
-
Modern UI Design:
- Color-coded status indicators
- Progress bars for energy usage
- Status bar with WiFi, time, heater status
- Responsive button interface
🚀 Upload to ESP32-S3:
-
Connect your ESP32-S3 board via USB
-
Upload firmware:
pio run -t upload -
Monitor serial output:
pio device monitor
🌐 Web Interface:
After upload, the device will also provide a web interface at:
- URL:
http://[ESP32_IP_ADDRESS] - API Endpoint:
http://[ESP32_IP_ADDRESS]/api
🎮 Touch Controls:
- Right side tap: Next page
- Page 1 buttons: Day Mode | Night Mode | Boost
- Page 2 buttons: Temperature +/- adjustment
- Page 4 buttons: Toggle auto-switch | Manual refresh
📊 Remote Control Features:
Your ESP32 can now send control commands to your heating system:
- Switch between day/night modes
- Activate boost heating
- Adjust target temperature
- All changes are immediately sent to:
http://5.104.177.12:7000/api/control
🔧 Configuration:
Current settings:
- WiFi: "Bubi 2.4"
- API Source:
http://5.104.177.12:7000/api/status - Auto-refresh: Every 10 seconds
- Page auto-switch: Every 15 seconds
Enjoy your new modern heating controller interface! 🏠🔥